Boss BV9562B Operator's Manual download pdf (Page 4)

OPERATOR’S MANUAL FOR LS SERIES

CO2 Laser Safety/Policies

Be careful. Laser machines are powerful tools, designed to cut or

engrave with highly focused heat energy. Never leave your laser

unattended while running and never let anyone unfamiliar with your

machine operate it. Always keep access covers on and top lid closed.

Avoid any direct exposure and never stare at the laser light while

operating. Notice and understand all of the warning labels attached to your machine.

The following safety measures must be strictly enforced and abided by. Boss Laser

shall not be held responsible for damages or injury resulting from improper use or

dismantling of the laser machine.

• NEVER operate laser machinery unless you have been properly trained.

• ALWAYS use protective eyewear, preferably wraparound goggles.

• ALWAYS turn the Exhaust Fan on while running the laser.

• NEVER set anything on top of the laser.

• NEVER leave the laser unattended. Remain with the machine when it is running

at all times so that you can hear and observe abnormalities and potential

hazards.

• Always maintain the machine’s environment free of heavy pollution such as

strong magnetic interference and strong electricity.

• NEVER use unapproved or unsafe materials, such as Polyvinyl Chloride (PVC) or

materials that emit noxious gases that can cause harm to your central nervous

system. (

See pages 6 & 7– Safe materials for you and your laser)

• NEVER operate the laser near flammable and explosive substances. The UV light

beam that is emitted is not visible and poses a great fire hazard.

• NEVER open the upper cover of the laser machine while it is running & NEVER

engrave a shiny metal or mirror. The laser beam can reflect and deviate (bounce

around) which can cause Blindness or Serious Injury requiring medical attention.

• NEVER push or pull the laser head and its gantry while the laser is running.

• NEVER dismantle the laser machine. There are laser and high pressure parts that

can case grave harm or injury.

In Case of Fire:

1. Press the EMERGENCY STOP button located above the LCD Panel

2. Lift the lid

3. Quickly blow out the flame (or use fire extinguisher for serious flames)

READ LABELS

Warnings

Fixture Reference

Operations

BOSSLASER - Page | 2

1 2 3 4 5 6 7 8 9 ... 30 31

No comments

Boss BV9562B Operator's Manual Page 4