OPERATOR’S MANUAL FOR LS SERIES
Plastics:
o ABS (acrylonitrile butadiene styrene)
o Acrylic (also known as Plexiglas, Lucite, PMMA)
o Delrin (POM, acetal)
o High density polyethylene (HDPE) – melts badly
o Kapton tape (Polyimide)
o Mylar (polyester)
o Nylon – melts badly
o PETG (polyethylene terephthalate glycol)
o Polyethylene (PE) – melts badly
o Polypropylene (PP) – melts somewhat
o Styrene
o Two-tone acrylic – top color different than core material, usually for custom
instrumentation panels, signs, and plaques.
• Foam:
o Depron foam – often used for RC planes.
o EPM
o Gator foam – foam core gets burned and eaten away compared to the top and
bottom hard shell.
• Other:
o Cloths (leather, suede, felt, hemp, cotton)
o Papers
o Rubbers (only if they do not contain chlorine Teflon (PTFE, Polytetrafluoroethylene)
o Woods (MDF, balsa, birch, poplar, red oak, cherry, holly, etc.)
Materials that can’t or should not be cut
• Metals
• Polycarbonate (PC, Lexan) due to the fumes.
• Any material containing chlorine
• PVC (Cintra) – contains chlorine
• Vinyl – contains chlorine
BOSSLASER - Page | 7
Comments to this Manuals