OPERATOR’S MANUAL FOR LS SERIES
Once finished your machine will be putting the full power of the laser tube dead on the
material.
Lens Replacement
Lenses are one of the few parts of a laser machine that need regular maintenance, primarily
regular cleaning. Lens cleaning is simple if done often, difficult or not possible if rarely done.
The lens is small, about 20 mm across, with 2
distinct sides, one flat and one convex or curved
out. When reinstalling, the curved side always
faces the laser path, away from the working
platform. As the illustration below shows, the lens
assembly consist of 2 main parts, the lens tube
and nozzle, then 3 parts inside the lens tube. The
lens, washer and slotted ring nut.
BOSSLASER - Page | 22
Comments to this Manuals