Boss BR-532 Owner's Manual download pdf (Page 92)

Insert Effect Parameter Functions

Level (-20–+20 dB)

This parameter adjusts the volume after the equalizer stage.

Flanger

The flanger effect gives a twisting, jet-airplane-like character

to the sound.

This effect can be used when the Modulation “Effect Type”

parameter is set to “FLANGER.”

Effect On/Off (OFF, ON)

This parameter turns the flanger effect on/off.

Rate (0–100)

Determines the rate of the flanging effect.

Depth (0–100)

Determines the depth of the flanging effect.

Manual (0–100)

Adjusts the center frequency at which to apply the effect.

Resonance (0–100)

Determines the amount of resonance (feedback). Increasing

the value will emphasize the effect, creating a more unusual

sound.

Separation (0–100)

Adjusts the diffusion. The diffusion increases as the value

increases. Effective when stereo output is used.

Lo-Fi Box

Produces a lo-fi sound.

Effect On/Off (OFF, ON)

This parameter turns the lo-fi box effect on/off.

Type

Select the mode of the lo-fi box.

RADIO:

The sound will appear to be heard from an AM radio. By

adjusting “Tuning,” you can simulate the sounds that

occur when you adjust the tuning frequency of the radio.

PLAYER:

The sound will appear to be heard from a gramophone.

The noise caused by scratches and dust on the record are

is simulated.

Tuning (0–100)

This is a parameter for “RADIO.” It simulates the sounds

that occur when you adjust the tuning frequency of an

AM radio.

Wow Flutter (0–100)

This is a parameter for “PLAYER.” It simulates the wow and

flutter which occur when the speed of the turntable is not

constant.

Noise (0–100)

This simulates noise.

Filter (0–100)

Adjusts the filter.

D:E Balance (100:0–0:100)

This adjusts the volume balance of the direct and effect

sounds.

Noise Suppressor

This effect reduces the noise and hum. Since it suppresses the

noise in synchronization with the envelope of the sound (the

way in which the sound decays over time), it has very little

effect on the sound, and does not harm the natural character

of the sound.

Effect On/Off (OFF, ON)

This parameter turns the noise suppressor effect on/off.

Threshold (0–100)

Adjust this parameter as appropriate for the volume of the

noise. If the noise level is high, a higher setting is

appropriate. If the noise level is low, a lower setting is

appropriate. Adjust this value until the decay of the sound is

as natural as possible.

* High settings for the Threshold parameter may result in there

being no sound when you play with your instruments volume

turned down.

Release (0–100)

Adjusts the time from when the noise suppressor begins to

function until volume reaches “0.”

Phaser

By adding varied-phase portions to the direct sound, the

phaser effect gives a whooshing, swirling character to the

sound.

This effect can be used when the Modulation “Effect Type”

parameter is set to “PHASER.”

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 124 125

Comments to this Manuals

No comments

Boss BR-532 Owner's Manual Page 92

Comments to this Manuals

Related products and manuals for Recording Equipment Boss BR-532