Boss BR-532 Owner's Manual Page 24
- Page / 125
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
24
Listening to the Demo Song
(2) Turn on the BR-532
Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
1. Before you turn the power on, make sure of the
following points.
❐ Are all external devices connected properly?
❐ Is the volume on the BR-532 and all other devices
completely lowered?
❐ Is the memory card inserted?
* The BR-532 is shipped with a memory card already inserted in
the slot.
2. Turn off the AUDIO SUB MIX switch on the rear panel.
fig.Q01-05a
3. Lower the MASTER fader on the BR-532.
fig.Q01-05b
4. Turn on the device connected to an input jack (i.e.,
GUITAR/BASS, MIC, or LINE IN).
5. Turn on the POWER switch located on the rear panel.
fig.Q01-06a
* Always make sure to have the volume level turned down before
switching on power. Even with the volume all the way down,
you may still hear some sound when the power is switched on,
but this is normal, and does not indicate a malfunction.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
6. Turn on the device connected to the output jack (i.e.,
LINE OUT or DIGITAL OUT).
If you are using the AC adaptor, make sure that the AC
adaptor does not become unplugged during operation. If
the AC adaptor becomes unplugged accidentally, the
recorded data may become damaged.
Adjusting the Display Contrast
Depending on where the BR-532 is situated, the display
contents may be difficult to read. If this is the case, perform
the procedure given below to adjust the contrast (1 to 15).
1. Press [UTILITY].
fig.Q01-08
2. Press PARAMETER [ ] [ ] to move the cursor to
“SYS,” and press [ENTER].
3. Press PARAMETER [ ] [ ] to select “LCD Contrast,”
and adjust the contrast with the TIME/VALUE dial.
fig.Q01-50
4. After completing the adjustment, press [EXIT]
repeatedly to return to the Play screen.
* During automatic updating, “Keep Power On!” appears in the
upper line of the display, while the lower line shows what is
being processed.
You can turn the TIME/VALUE dial while pressing [UTILITY]
to adjust the contrast. Use each procedure as appropriate.
Play Screen
The Play screen is the most fundamental screen of the
BR-532, and is the first screen that appears when the BR-
532 is turned on (see below).
fig.Q01-06b
* You can set the BR-532 so that the remaining recording
time is displayed during recording. Refer to “Displaying
the remaining available recording time” (p. 73).
- Owner’s Manual 1
- IMPORTANT NOTES 4
- Before Using Memory Cards 5
- Copyright 5
- Contents 6
- Introduction to the BR-532 11
- (C1 to B6 sound range) 12
- Phrase Trainer Function 12
- Formatting the memory card 13
- (SmartMedia) 13
- Panel Descriptions 14
- Rear Panel 19
- Inserting batteries 20
- Polarity Switch 23
- (2) Turn on the BR-532 24
- Selecting a song 25
- Playing Back a Song 25
- Changing the current position 26
- Recording/playing back a song 27
- Recording a new song 28
- (3) Connecting instruments 29
- Switching the LEVEL METER 30
- Monitoring the sound 30
- Switch effect patches 31
- Recording without effects 31
- Playing the rhythm guide 32
- Changing the Rhythm Pattern 32
- Changing a Rhythm’s Tempo 32
- Tapping to change the tempo 33
- Selecting the recording track 33
- (Record in Mono) 33
- (Record in Stereo) 33
- Recording operations 34
- Playing back recorded music 35
- Playback 35
- Advanced 37
- Repeating Playback—Repeat 38
- Setting the repeat portion 39
- Changing the position of the 40
- Advanced Use 41
- Adding width to the sound 42
- —Loop Effect 42
- Mixing down 43
- Disabling digital copying 43
- Changing V-Tracks 44
- Manually punching in and out 45
- How to Record 47
- Registering a locator point 49
- Moving to the locator point 49
- Deleting a locator point 49
- Copying recorded data 50
- (Track Copy) 50
- (TIME/MES) 51
- START END TO Time 51
- Moving recorded data 53
- (Track Move) 53
- Moving a complete track (ALL) 54
- Erasing recorded data 55
- (Track Erase) 55
- Exchanging recorded data 57
- (Track Exchange) 57
- Reversing the last operation 58
- Canceling the Undo 58
- Copying a Song (Song Copy) 59
- Erasing songs (Song Erase) 59
- Saving memory on the 60
- Naming songs—Song Name 60
- Affix here 61
- Using the Rhythm Guide 62
- Creating patterns 63
- Inserting a step 64
- Erasing a step 64
- Deleting all steps 65
- Copying patterns 66
- Changing a pattern name 66
- MIDI Fundamentals 67
- MIDI Sound Module 68
- MIDI OUT 68
- BR-532 as the master 69
- Operating MMC-compatible 70
- AUDIO SUB MIX : OFF 72
- AUDIO SUB MIX : ON 72
- Displaying the remaining 73
- Displaying the memory card 73
- Scrubbing to find the music 74
- Enabling the Preview Function 75
- Tuning an instrument—Tuner 76
- Slowing down the speed 78
- (Time Stretch function) 78
- Canceling the center sound 78
- (Center Cancel function) 78
- Using the insert effects 79
- Changing the insert effect 81
- Using the loop effects 82
- User patterns 84
- CHORUS/DOUBL’N/REVERB 85
- Insert Effect Algorithm List 86
- 4. ACOUSTIC GUITAR 87
- 5. BASS MULTI 87
- 6. COSM BASS AMP 87
- 7. VOCAL MULTI 87
- 8. VOICE TRANSFORMER 87
- 9. STEREO MULTI 88
- 10. LO-FI BOX 88
- 11. VO+GT.AMP 88
- 12. VO+AC.SIM 88
- Acoustic Guitar Simulator 89
- Acoustic Processor 89
- Bass Simulator 89
- Compressor 90
- De-esser 90
- Defretter 90
- Doubling 91
- Enhancer 91
- Equalizer 91
- Lo-Fi Box 92
- Noise Suppressor 92
- Pitch Shifter 93
- Speaker Simulator 94
- Tremolo/Pan 95
- Voice Transformer 95
- Preset Pattern 97
- Saving patterns 98
- Optimizing 98
- Utilizing the V-Tracks 99
- How to use the Rhythm Guide 100
- Recording using an external 101
- Backing up a song 102
- Troubleshooting 103
- Problems with the memory card 104
- Memory card data was damaged 104
- Error Messages 105
- What is an event? 106
- Parameter List 107
- ■ Rhythm Guide Parameter (*1) 108
- ■ Song Parameter (*1) 108
- ■ System Parameter (*2) 108
- ■ Pattern Arrange Parameter 109
- ■ Effects Parameter (*1) 109
- Effect Patch List 110
- MIDI Implementation 111
- 2. MIDI Machine Control 112
- 3. Supplementary material 113
- MIDI Implementation Chart 115
- Specifications 116
- Appendices 119
- MEMO 121
- Track Sheet 122
- For EU Countries 123
- For Canada 123
- CORRECTIONS 125
- Listening to the Demo Song 125
Related products and manuals for Recording Equipment Boss BR-532
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.242 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals