Boss BR-532 Owner's Manual download pdf (Page 33)

Recording/playing back a song

Quick Start (Recording/playing back a song)

Tapping to change the tempo

You can determine the tempo by the timing with which you

press [TAP].

Tap on [TAP] four or more times to change the tempo of the

RHYTHM GUIDE. The tempo becomes that in which you

tapped.

fig.Q01-25

(6) Recording

Selecting the recording track

Press either [1], [2], [3], or [4] at REC TRACK to select the

recording track.

If the button flashes in red, that track is ready for recording.

fig.Q01-26

The status of each track can be determined from the indicator

on the button.

Off: No recorded data exists on the track.

Green: Recorded data exists on track.

Red: The track is selected for recording.

If a track with existing data is selected for recording, the

indicator will light alternately in orange and green.

If INPUT SELECT [GUITAR/BASS] or

[MIC] are lit

fig.Q01-27

Since the input is monaural, the recording is normally

performed as a monaural recording onto one track. Press one

of the four track buttons at REC TRACK to select the one

track to which to record.

However, if you want to record in stereo to increase the effect

of insert effects, you can simultaneously press the [1] and [2],

or [3] and [4], REC TRACK buttons for stereo recording onto

two tracks.

fig.Q01-28

You set rhythm patterns so that the tempo changes to

match the song's progression (p. 63).

Using the following procedure to change the tempo

disables the tempo set in the rhythm pattern, and instead

the performance is played with the altered tempo.

(Record in Mono)

(Record in Stereo)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 124 125

No comments

Boss BR-532 Owner's Manual Page 33