Boss BR-532 Owner's Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 125
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
27
Quick Start (Recording/playing back a song)
Recording/playing back a song
(1) Preparing the memory card
The BR-532 writes the recorded data directly to the inserted
memory card. Therefore, for recording or playback, the
memory card must be inserted.
Memory cards supported by your BR-532 (p. 13)
Inserting the memory card
Before inserting the memory card (SmartMedia), be sure
to first turn off the BR-532. If a memory card is inserted
when the power is turned on, the data in the memory
card may be destroyed, or the memory card may become
unusable.
Insert the memory card into the memory card slot.
The supplied memory card still has some remaining space;
however, for extended recording, you will need to erase
some of the demo song or prepare a new memory card (32
MB or greater is recommended).
For information on how to erase data from the memory card,
refer to “Erasing songs (Song Erase)” (p. 59).
* A write-protect sticker (p. 61) is not affixed to the supplied
memory card. In case you would like to save the data, you will
need to affix a write-protect sticker to the card.
Formatting the memory card
* This is not necessary for memory cards that have already been
used with the BR-532.
Newly purchased memory cards, or memory cards that have
been used previously with a computer will need to be
prepared so they can be used with the BR-532.
Carry out the following steps in the order given to complete
the procedure (this preparation process is called
“formatting”).
1. Press [UTILITY].
fig.Q01-08
2. Press PARAMETER [ ] [ ] to move the cursor to
“INI,” and press [ENTER].
fig.R11-01
3. Press PARAMETER [ ] [ ] to move the cursor to
“CRD,” and press [ENTER].
“Format?” appears in the display.
fig.R11-02
4. Press [ENTER].
“Are you sure?” appears.
fig.R11-03
* If the write-protect sticker is affixed to the memory card,
“Protected!” appears in the display. You cannot initialize the
memory card if this message appears.
5. To continue with the initializing, press [ENTER] (YES).
To cancel the operation, press [EXIT] (NO) (or [UTILITY]).
When [ENTER] (YES) is pressed, initializing begins.
When the formatting has been completed, “Completed!”
appears in the display, and you are returned to the Play
page.
* Depending on the capacity of the memory card, initializing
may take more than ten minutes to complete. This is not a
malfunction.The progress of the initializing is shown in the
display. Do not turn off the BR-532 until the initializing has
been completed.
Do not remove the memory card or turn off the BR-532
while the memory card is being initialized. Doing so can
destroy the data on the memory card and/or render the
memory card itself unusable.
* When formatting starts, a new song is automatically created.
In this case, the data type selected is STANDARD (LV1).
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 124 125

Comments to this Manuals

No comments