Boss Food Processor Service Manual download pdf (Page 6)

4. Remove the housing base from the motor housing.

Service Procedures

5. Replace the housing base onto the motor housing in the

reverse order.

Most of the KitchenAid

Food Processor components are

contained within the food processor motor housing. Perform

the Component Access procedure to gain access to the food

processor components.

NOTE: When removing self-tapping screws from

any plastic or metal housing, the filings

created will be scattered onto adjoining

components. Prior to performing any

reassembly procedure, make sure to

remove all the filings using clean rags,

low-pressure compressed air, etc.

COMPONENT ACCESS (HOUSING BASE REMOVAL)

- ALL MODELS -

Most replacement procedures will require access to the inside

of the food processor. To gain access to the food processor

components:

1. Unplug the power cord.

2. Turn the food processor on its side on a cushioned

surface.

3. Using a T-20 torx driver, remove the four (4) M4X18

stainless steel screws securing the housing base to the

motor housing.

1 2 3 4 5 6 7 8 9 10 11 ... 49 50

No comments

Boss Food Processor Service Manual Page 6