Boss DR-55 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Writing 16-Step Patterns
1. Set RHYTHM SELECT [#10] as desired; set the VARIATION switch [#7] at "A" or"B".
In the example, the rhythm pattern will be loaded as rhythm pattern 1-A
2. Set the MODE switch [#8] at WRITE; the TEMPO indicator [#3] should light
indicating the beginning of the measure.
NOTE: The MODE switch [#8] should be changed to the WRITE position only when the
ryhthm pattern is not running.
If the TEMPO indicator [#3] does not light, use either of these two methods:
Press [#12] enough times to light the TEMPO indicator .
Set the MODE switch [#8] at PLAY and press <<STOP>>, then return the MODE
switch [#8] to WRITE.
3. Select the desired sound with the SOUND switch [#9] .
BD=bass drum; SD=snare drum; RS = rim shot; AC = accent in the example,
the bass drum sound has been selected for loading.
4. Write the rhythm using the [#11] and [#12] buttons. After loading sixteen steps;
the TEMPO indicator [#3] will light showing that the measure is fully loaded.
If the TEMPO indicator [#3] does not light, it indicates that the measure has not
been completely loaded.Check by playing the rhythm, or write the rhythm again
from the beginning.
5. Repeat Steps 3 and 4 above for the other two sounds. In the rhythm shown, the
rim shot sound is not used. Set the SOUND switch [#9] at "RS" and press [#12]
sixteen times to clear the memory. If this is not done, the previously loaded rim
shot pattern will be produced when the rhythm is played.
6. To add accents to the rhythm pattern, set the SOUND switch [#9] at "AC" and
press [#11] at those points where an accent is desired and [#12], where accents
are not desired. If no accents are desired at all for the pattern. press [#12] sixteen
times to clear the memory of the previously loaded accents.
7. To check the pattern, set the MODE switch [#8] at PLAY
and press the START [#11] button.
Writing 12-Step Patterns
Set RHYTHM SELECT [#10] at either "7" or "8". Load in the same manner as above, but using twelve steps
instead of sixteen. 12-step rhythm patterns can be used for triple rhythms such as 3/4 and 3/2.
Dr Rhythm DR-55 - Sound Of Music
file:///G|/MUSIQUE/notices/Manuels à assembler/Dr Rhythm DR-55 - write mode 03.htm (2 sur 4) [15/12/2003 01:13:19]
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments