Boss 625CA Specifications Page 42
- Page / 124
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-4
SECTION 3
SERVICE
053430; 01/11
3.3
Drive Belt
3.3.0 Drive Belt Maintenance
The drive belts MUST be free from oil and
foreign contaminants to prolong life.
3.3.1 To Replace The Drive Belt:
1) The MSP445 is equipped with a spare belt located inside the belt guard.
2) Place the trowel on a flat, level surface with the blades pitched flat.
3) Disconnect the battery. Refer to Figure 3.3.1.
4) Use a M6x1.0x40 mm bolt to spread apart the pulleys to allow slack in the belt
and remove it from the lower and upper pulleys. Refer ti Figure 3.3.3.
5) Replace new belt in opposite order of removal.
6) Reconnect the battery.
3.3.2 To Add Drive Belt:
1) Place the trowel on a flat, level surface with the blades pitched flat.
2) Disconnect the battery. Refer to Figure 3.3.1.
3) Remove battery and plate assembly by removing (4) 5/16-18 x 1 bolts. Refer
to Figure 3.3.1
4) Disconnect and remove u-joint assembly by removing (4X) 1/4-20x3/4 socket
head round screws and 1/4 split lock washers on the driveshaft hub closest to
driven pulley. Refer to Figure 3.3.2.
5) Apply one drop of blue Loctite No. 242 to the (4X) 1/4-20x3/4 socket head
round screws and reassemble with 1/4 split lock washers in opposite order of
disassembly.
6) Install battery plate assembly with one drop blue Loctite No. 242 on the
5/16-18 x 1 bolts.
7) Reconnect the battery.
- OPERATIONS›PARTS 1
- Riding Trowel 3
- Limited Warranty 4
- Table of Contents 5
- Table of Contents, continued 6
- Dealer Information 8
- Ordering Parts 9
- Model Number - Serial Number 10
- Unit Identification 11
- Technical Specifications 12
- CE MARKING Compliance: 13
- Engine Specifications 14
- Machine Dimensional 15
- Specifications 15
- Sound And Vibration Data 16
- Section 1 17
- CALIFORNIA PROPOSITION 65 18
- State Regulations 18
- Federal Regulations 19
- SILICOSIS WARNING 19
- RESPIRATORY HAZARDS 19
- General Safety Precautions 20
- Spark Arrestor Notice 21
- Operating Safety 22
- 1.3, continued 23
- Engine Safety 24
- Service Safety 25
- Safety and Operation Labels 26
- 1.6, continued 27
- Section 2 29
- OPERATIONS 29
- SECTION 2 30
- Introduction 31
- Start Up Procedures 32
- 2.2, continued 33
- Operating Instructions 34
- 2.3, continued 35
- Section 3 39
- SECTION 3 40
- Periodic Maintenance 40
- Trowel Gearbox 41
- Drive Belt 42
- 3.3, continued 43
- Control Lever Adjustment 46
- 3.4, continued 47
- 3.5, continued 49
- Lift Lever Adjustment 50
- 3.6, continued 51
- Transporting Trowel 52
- 3.7, continued 53
- Battery Jump Start 56
- 3.8, continued 57
- Winterizing Retardant System 58
- 3.9, continued 59
- Winterizing Retardant System 59
- Section 4 61
- Factory Service Information 62
- Replacement Parts Procedures 63
- 4.1 Illustration, Front View 64
- Upper Frame Unit 64
- 4.1 Parts List, Front View 65
- 4.2 Illustration, Rear View 66
- 4.2 Parts List, Rear View 67
- 4.3 Illustration 68
- 4.3 Parts List 69
- 4.4 Illustration, Front View 70
- Lower Frame Unit 70
- 4.42 Parts List, Front View 71
- 4.5 Illustration, Rear View 72
- 4.5 Parts List, Rear View 73
- 4.6 Illustration 74
- Fuel System 74
- 4.6 Parts List 75
- 4.7 Illustration 76
- Electrical System 76
- 4.7 Parts List 77
- 4.8 Illustration 78
- Steering System 78
- 4.8 Parts List 79
- 4.9 Illustration 80
- Redardant Spray System 80
- 4.9 Parts List 81
- 4.10 Illustration 82
- Pitch Control Assembly 82
- 4.10 Parts List 83
- 4.11 Illustration 84
- Gas Power Unit 84
- 4.11 Parts List 85
- 4.12 Illustration 86
- Engine System 86
- 4.12 Parts List 87
- 4.13 Illustration 88
- Engine Mounting System 88
- 4.13 Parts List 89
- 4.14 Illustration 90
- Driveline System 90
- 4.14 Parts List 91
- 4.15 Illustration 92
- Throttle Control System 92
- 4.15 Parts List 93
- 4.16 Illustration 94
- Oil Drain System 94
- 4.16 Parts List 95
- 4.17 Illustration 96
- Exhaust System 96
- 4.17 Parts List 97
- 4.18 Illustration 98
- 4.18 Parts List 99
- Section 4 100
- 4.19 Illustration 100
- Left Hand 20:1 Rotor Assembly 100
- 4.19 Parts List 101
- 4.20 Illustration 102
- Right Hand Spider Assembly 102
- 4.20 Parts List 103
- 4.21 Illustration 104
- Left Hand Spider Assembly 104
- 4.21 Parts List 105
- 4.22 Illustration 106
- 4.22 Parts List 107
- 4.23 Illustration 108
- 4.23 Parts List 109
- 4.24 Illustration, Front View 110
- 4.24 Parts List, Front View 111
- 4.25 Parts List, Rear View 113
- 4.26 Illustration 114
- 4.26 Parts List 115
- 4.27 Illustration 116
- 4.27 Parts List 117
- 4.28 Illustration 118
- 4.28 Parts List 119
- 4.29 Illustration 120
- 4.29 Illustration, continued 121
- 4.30 Illustration 122
- 053430; 01/11 123
- INTENTIONALLY BLANK 123
Related products and manuals for Car media receivers Boss 625CA
Car media receivers Boss MR1465S User Manual
(19 pages)
(19 pages)
Car media receivers Boss 638BA User Manual
(18 pages)
(18 pages)
Car media receivers Boss 810DBI User Manual
(18 pages)
(18 pages)
Car media receivers Boss 726CA User Manual
(21 pages)
(21 pages)
Car media receivers Boss MR1400S User Manual
(22 pages)
(22 pages)
Car media receivers Boss BV7300 User Manual
(28 pages)
(28 pages)
Car media receivers Boss BV7300 User Manual
(27 pages)
(27 pages)
© 2020, manymanuals.com. All rights reserved. | 0.951 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals